Descaling liquid PURIFY AGENT AntiCalc 1 l

Suitable for all types of automatic coffee machines.
Composition: < 5%: complexing agent, EDTA, sodium tetraborate, 15-30%: citric acid, lactic acid, sulfamic acid, > 30%: drinking water.
Volume: 1 l
Storage conditions: store in closed packaging, at a temperature from +5°C to +35°C, in an upright position, away from sunlight and heat sources.
Attention! Causes severe skin and eye irritation. Thoroughly rinse items that have come into contact with the product with water. Wear protective gloves/protective clothing/face/eye protection. If the product is swallowed, consult a doctor immediately. Do not induce vomiting! In case of contact with skin or eyes, rinse thoroughly with water for several minutes. If necessary and possible, remove contact lenses. Continue rinsing. If skin or eye irritation persists, consult a doctor.

Directions for use: To fill the dispenser*, open the cap and press the bottle. Pour 50 to 150 ml of descaling product (depending on the degree of contamination) into a water container, then fill it with water and stir. Turn on the device and pass 2 cups of solution through the steam nozzle (the capacity of each cup is 150 ml). Turn off the power button. Leave the descaling solution for 15-20 minutes. Turn on the machine and run the solution (2 cups) at 3 minute intervals until there is no descaling solution left in the water container. Rinse the water container with clean water and refill it. Rinse the parts of the device by running about 1 liter of water through a suitable steam/hot water nozzle. Run 1 liter of water through the outlet spout (if possible). If this is not possible, make 3 cups of coffee and discard the coffee. Remove the working group (automatic coffee makers only) and rinse it with clean water.
Special instructions for cleaning coffee makers with an automatic descaling program are given in the relevant sections of the operating instructions. May cause corrosion.
* Contents of one dispenser 30 ml