ZTTO brake pads for electric scooter Kugoo G2 pro Kugoo G1

ZTTO metal brake pads for the electric scooter Kugoo G2 pro, Kugoo G1

Metal, reinforced by 85%, consisting of an alloy of different metals. They are characterized by increased wear resistance and better braking characteristics.

The size of the pads is 22.5 mm by 33.5 mm.

The set includes two pads.

Good brakes are our safety. Many electric scooters suffer from the disease of bad brakes. This is mainly due to the small wheels. The brake caliper is constantly in a dirty environment. There are a couple of recommendations for high-quality performance of the pads:

1. The brake system must be configured so that the entire working friction part falls on the brake disc.

2. The brake system must be kept clean. Brush accessible parts of the brakes frequently.

3. If dirt, oil, or water gets in, you need to dry it, clean it, and preferably treat it with an aerosol for cleaning the pads.

Creaking pads is also a common occurrence in scooters. It is not enough to have high-quality pads, but you need to install and configure them correctly. There are also a couple of recommendations:

1. Make sure that the entire friction surface falls on the disc (if not, adjustment is needed)

2. Before installing new pads, you need to sand the working area of ​​the disc with fine-grained sandpaper.

3. After installing the pads, you need to adjust the gaps and the pressing angle of the pads.

4. Clean the brake system, if possible use an aerosol to clean and degrease the pads and disc.