Metal brush (ruff) for cleaning the chimney Savent 150 mm

During operation of solid fuel boilers, fireplaces and stoves, soot, resins and other deposits form on the surface of the walls of the combustion chamber and in the chimney. They cause a decrease in draft, inefficient fuel combustion and a decrease in the thermal output of the boiler. Failure to systematically clean the chimney can lead to soot ignition and carbon monoxide entering the room. To avoid the problems described above, we recommend periodically checking the draft, the degree of contamination of the chimney and cleaning.

Savent 150 mm metal chimney brush easily removes soot and other deposits from the walls of chimney pipes, thus restoring the necessary draft for efficient boiler operation. The brush is made of high-quality carbon steel, has a high quality and durable flexible design, which allows for high-quality cleaning of any smoke ducts. Designed for cleaning brick, asbestos and other chimneys, with the exception of stainless steel chimneys. Using a metal brush to clean a stainless chimney can damage it, so we recommend a plastic brush for cleaning these types of chimneys.

The brush bristles are made of oxidized spring wire with a diameter of 0.5 mm, which is sandwiched between four galvanized rods with a diameter of 4 mm. At one end the brush has an M12 thread, and at the other there is a ring for attaching a cable or rope.

The brush is designed for both cleaning with flexible sticks and with a weight.