Powder for decalcification PURIFY AGENT AntiCalc 120 g (8 pcs x 15g)

Suitable for all types of automatic coffee machines.
Composition: < 5%: complexing agent, EDTA, sodium tetraborate, > 15%: citric acid, lactic acid, oxalic acid.
Net weight: 120 g (8 pcs x 15 g).
Storage conditions: store in a dry place, out of reach of children, at a temperature of +5 to +35°C, away from sunlight and heat sources.
Attention! Keep away from children! Do not use for food purposes! If the product is swallowed, consult a doctor immediately. Do not induce vomiting! If the product gets into your eyes or mucous membranes, rinse thoroughly with running water and, if necessary, consult a doctor.

For coffee machines without an automatic descaling program:
Empty the contents of the bag into a water container, then fill it with 1 liter of water and stir. Turn on the device and pass 2 cups of solution (the capacity of each cup is 150 ml). Turn off the power button. Leave the descaling solution for 15-20 minutes. Turn on the machine and run the solution (2 cups) at 3 minute intervals until there is no descaling solution left in the water container. Rinse the water container with clean water and refill it. Rinse the parts of the device by running about 1 liter of water through a suitable steam/hot water nozzle. Run 1 liter of water through the outlet spout (if possible). If this is not possible, make 3 cups of coffee and discard the coffee. Remove the working group (automatic coffee makers only) and rinse it with clean water.
Special instructions for cleaning coffee makers with an automatic descaling program are given in the relevant sections of the operating instructions.