Motorcycle accessories

The holder for the Simple smartphone Oxford CLIQR Cycle in use, but very reliable system of fastening allowing to install a telephone of any size on a wheel. You will find external fastening, two silicone inserts for winding on a wheel in a set - with a diameter of 25.4 or 31.8 mm - and two adapters for connection to your phone or any other device which you are going to use. The holder is made of the nylon filled with glass, and it can seem a little rather big for the road bicycle, but for gravel use or driving by mountain bicycle you estimate its durability. Quite wide in the field of a hinged clip (17 mm) therefore to you can be required to recheck whether there is enough place for the device if you have aerobar where tops not completely round. At distance of 75 mm (from the center to the center) fastening is not allocated with a large number, but Oxford developed it so that the area of a clip of the device was above, than other parts of fastening irrespective of, your phone or the device are how big. Around there has to be a gap that it did not face a trunk or a wheel. To use fastening, at first it is necessary to attach one of adapters to the back panel of phone or a cover. The adapter uses the VHB adhesive tape from 3M and has very strong communication. After connection to phone it will not move a little without big effort. It is very simple to place phone in fastening, by means of the small latch which is fixing the adapter, and reliably holding it on the place. To delete number, it is enough to press the button to open a tab. The holder is compatible to the majority of phones, covers for phones, GPS devices and compact an action chambers. Technological features: The adapter of the device uses high-quality glue 3M the Double mechanism of blocking with the failsafe Device system can change between album and portrait orientation of Harakteristiki: Production Great Britain is suitable for diameters of 31.8 mm and 25.4 mm