Flame oven Kratki THOR 8 VIEW

Modern design

The trilateral slope increases the appearance of fire, and the decorative glass panel enhances its charm. The middle of the stove, lined with TERMOTEC, perfectly contrasts with the razor, giving the design a modern look.

The hinged handle allows you to carefully close the door. This device is ideally suited for recuperation units.

Ecological combustion

The device complies with the Ecoproject and the BImSchV 2 standard, meaning maximum CO emissions.

Maximum energy consumption

More efficient combustion and better preservation of temperature is achieved by lining the combustion chamber with TERMOTEC - a heat-accumulating material that increases the combustion temperature.

The burning of particles causes damage to the deflector as soon as smoke gases pass through. This process also makes combustion more efficient and guarantees a reduction in energy wastage, thereby minimizing waste emissions into the atmosphere. In addition, a partition was installed at the dimochoid opening, which has a function similar to a deflector, which further increases the efficiency of the device.

Do you need to call for additional supply of air in the fire? 100 mm. The connection itself can be brought up to the stove from behind or from below. This regulation is carried out behind the help of a throttle valve, which is located at the bottom of the door, which does not allow for the wrong use. The whole mechanism is even quieter and uninterrupted.

The stove has a triple aeration system in the combustion chamber. The first wind, which lightens the burning of the wood, is served under the rubbish. Recycled air - which is environmentally friendly - is delivered through the doors at the rear.

And in the oven, a clean glass system is installed (the curtain is repaired), so that the wind is supplied directly to the glass through a system of channels located on the sides of the fireplace. In this way, the jelly is placed at the upper part of the combustion chamber, so that the gases released during the firewood burning process are combusted, which further reduces the release of waste CO into the atmosphere.

Safety at its best

The front part of the THORA is lined with heat-resistant ceramics, which can withstand temperatures up to 660°C. We provide a certificate of cleanliness and safety.

The body and front wall are exposed to high temperatures due to the use of high-grade steel. They will ensure the stability of the entire structure.

The complete tightness of the device is ensured with fine welded seams in the closed combustion chamber. The steel elements are laser cut in a quick process and then bent using CNC bending machines.

Comfortable decoration

The stove has specially profiled tiles, made of TERMOTEC material, which is why the chamber is hot and contains a lot of wood.

The ash can be easily trimmed in a clean container where ash accumulates.

The oven surface becomes uncleanable due to the stagnation of the clean glass system.

A damaged curtain shields the area in front of the combustion chamber. Why don't nerds get lost?

At THOR, you can install a smoke vent both at the bottom and below the structure, which makes installation easier.

Under the fire chamber there is a camera that has a water supply connection system.