Scorching stove Kratki KOZA K9 ? 150 TURBOFAN

Maximum heat output

Maximum heat output and uninterrupted operation of the walls of the combustion chamber, made from high-acid chavun with a thickness of 8 mm.

The burning of particles causes damage to the deflector as soon as smoke gases pass through.

Manual control over the combustion process for additional ash.

Turbofan is a special device designed to effectively distribute heat from the oven to the area in which it operates.

Ecological fires

The device supports the Ecoproject.

Safety at its best

The classic front part of the stove is lined with heat-resistant ceramics, which can reach temperatures up to 660°C.

The decorative partition makes it easier to clean when vikorized and protects from falling firewood.

Comfortable cleaning

The cold handle system allows you to remove it when baking in the oven.

A box/container for ash, in which excess burnt wood accumulates and a loose grate for easier removal of ash.

Removal of sticking of boils due to the clean glass system (wind deflector).

TURBOFAN is available for sale only with a standing seat - KOZA K6, K7, K8, K9 and K10.

Turbofan is not a device that provides an effective distribution of heat from the stove to the area in which it operates. It is an invisible part of the oven, located on its back plate, so that it does not interfere with the aesthetic power of the device itself. This operation is simple and is based on increased flow through the rear walls of the device, temperature recovery and transfer to the premises.

At the warehouse of the system there is a turbine, attached to the cover, which is also a through channel, and a thermostat. The thermostat consists of a regulator and a head, or, in other words, a temperature sensor, connected to each other through capillaries. At the same time, due to the increased temperature of the back wall of the fireplace, the head heats up. Once the sensor reaches the normal temperature, the system starts automatically and the turbine begins to finish its job. The wind is drawn in from the excess medium through two openings on the front and bottom of the turbine cover. The winder removes heat from the back wall of the fireplace and transfers it to the living room. Set the thermostat control range from 50 to 300?C.

This type of consideration significantly increases the comfort of the furnace, since the stove can determine at what temperature the back wall of the system will turn on, which increases the efficiency of heat transfer to the premises.