Flame oven Kratki ANTARES 10

Current design

It is widely inclined to shy away from looking at the fire more. The middle of the stove is lined with TERMOTEC material, which wonderfully contrasts with the razor, giving the design a modern look.

The strong vertical handle ensures airtight sealing of the doors. This device is ideally suited for recuperation units.

Below the fire chamber there is an additional chamber that is closed, which has a call return supply system. The main komori doors rely on an intuitive push to open system, without requiring an accessory handle.

Maximum energy consumption

More efficient combustion and better preservation of temperature is achieved by lining the combustion chamber with TERMOTEC - a heat-accumulating material that increases the combustion temperature.

The burning of particles causes damage to the deflector as soon as smoke gases pass through. This process increases the efficiency of the combustion chamber and guarantees better energy efficiency and thus minimizes the release of waste emissions into the atmosphere. In addition, a damper was installed on the flue gas supply, which performs a similar function of the deflector, which further enhances the effect of the device.

Do you need to call for additional supply of air in the fire? 125 mm. The connection itself can be brought up to the stove from behind or from below. This regulation is carried out behind the help of a throttle valve, which is located at the bottom of the door, which does not allow for the wrong use. The whole mechanism is even quieter and uninterrupted.

The stove has a triple aeration system in the combustion chamber. The first wind, which lightens the burning of the wood, is served under the rubbish. Secondary air, which ensures environmentally friendly combustion, is delivered through the courtyard doors in the rear wall.

And in the oven, a clean glass system is installed (the curtain is repaired), so that the wind is supplied directly to the glass through a system of channels located on the sides of the fireplace. In this way, the jelly is placed at the upper part of the combustion chamber, so that the gases released during the firewood burning process are combusted, which further reduces the release of waste CO into the atmosphere.

Safety at its best

The front part of ANTARES is lined with heat-resistant ceramics, which can withstand temperatures up to 660°C. We provide a certificate of cleanliness and safety.

The body and front wall are exposed to high temperatures due to the use of high-grade steel. They will ensure the stability of the entire structure.

The complete tightness of the device is ensured with fine welded seams in the closed combustion chamber. The steel elements are laser cut in a quick process and then bent using CNC bending machines.

Comfortable cleaning

The stove has a specially profiled tile made from TERMOTEC material, which is why the combustion chamber is designed to accommodate a large amount of wood.

The ash can be easily trimmed in a clean container where ash accumulates.

The oven surface becomes uncleanable due to the stagnation of the clean glass system.

A damaged curtain shields the area in front of the combustion chamber. Why don't nerds get lost?

Ecological combustion

The product complies with the Ecoproject criteria and restriction norm BlmSchV 2, which means the maximum release of CO.