Sliding system mechanism for interior doors USK 3026 carbon (80kg) analogue EKF

The sliding system mechanism USK 3026 is used for installing sliding doors weighing up to 80 kg. Fully compatible with sliding system mechanisms EKF ESW-120101 and EKF E-120101-02.

The USK 3026 sliding system mechanism kit includes:

- Carriage with rollers - 2 pcs.
(attached to the upper end part of the door leaf; the rollers have a bearing coated with a special polymer material, due to which the movement of the carriage inside the guide profile is smooth and easy. The carriage also has an adjusting screw that allows you to adjust the gap between the floor and bottom of the door). The carriage is made of carbon (durable plastic). The length of the carriage is 90mm, the width of the carriage along the wheel axis is 26mm, the diameter of the wheel is 25mm. The size of the platform for fastening the door leaf is 112 * 18 * 2.5 mm.

- Limiter (stopper) - 2 pcs.
(is a black insert that is mounted at both ends of the guide profile and fixes the door leaf in extreme positions, preventing it from moving too far and making closing the door softer)

- Guide flag - 1 pc.
(attached to the floor on the same plane as the leaf. Usually it is installed at a distance of 2-5 cm from the end of the door leaf in the closed position of the door)

Also for installing sliding doors The following components are required, which are not included in the system!!!

- Upper guide profile (not included in the system package). Depending on the design of the intended sliding door, the EKF E-120101-02 system can be equipped with or. The profile is mounted to the wall using.

(not included in the system package)
(the profile is attached to the lower end part of the door using self-tapping screws and will subsequently serve as a guide for the flag when opening/closing the door) < /p>

(not included in the kit)
(designed for mounting the upper guide profile to the wall, usually 4-5 pieces of fastenings are used for a 2 m profile)

(not included in the kit)
(Handles for sliding doors should not protrude beyond the edge of the door leaf and interfere with closing the door. Therefore, they are usually handles recessed into the leaf. They can be either with or without a lock.