Electric sauna heater Bonfire DM120 + CON-1SX remote control

Electric sauna heater Bonfire DM120 12 kW power is designed to heat the air in a sauna with a volume of 10 to 18 cubic meters.
Controlled by remote control CON-1SX. The temperature and operating time of the heater are set on the touch panel of the remote control.

The heater heats the air to 100 °C in 40-60 minutes, depending on the size, design and thermal insulation of the sauna. The maximum continuous operation time is 6 hours.

The case is made of stainless steel. The heating elements are made of heavy-duty metal, have a factory warranty and a long service life.

This model is installed on the floor. Connection to a 380V power supply.

Temperature adjustment Using the touch panel on the control panel, the desired sauna temperature is selected. The set temperature is reached in the sauna in about an hour, depending on the size, design and thermal insulation of the sauna. The thermostat controls maintaining the sauna temperature within the adjusted parameters. The thermostat also protects the heater from excessive overheating by turning off the power when the temperature reaches +110C.

For the heater stove, you should use stones with a diameter of 4-8 cm specially designed for this purpose (stones are not supplied)

Subject to all rules and regulations for connecting/operating electrical Bonfire sauna stoves, the manufacturer guarantees the safety, quality, reliability and long service life of its product.