Wood-burning stove for steam room Fire "Heater with removal", 4-8mm

For a sauna or traditional bathhouse, one of the main elements of the arrangement is, of course, a stove, or, as it is called, a Kamenka stove. With all the variety of modern offers of stoves for baths and saunas (electric, gas, etc.), real connoisseurs prefer classic wood stoves. The presented wood stove allows you to heat a steam room, dressing room and get sufficient steam without any effort. Made from boiler steel. In the upper part of the firebox, a steel plate is welded hard, which allows you to increase the flow of furnace gases, thereby increasing the efficiency, transferring more heat to the furnace body. The loading window spans the entire width of the furnace, which facilitates the loading process and also allows loading firewood with a diameter of up to 250 mm and a length of up to 600 mm. A cast-iron grate is made across the entire cross-section of the stove, through which oxygen for ignition flows in one direction, and in the opposite direction waste ash spills into the ash drawer, which is also made along the entire width and length of the stove. The presence of an ash drawer allows you to clean the stove without stopping during long-term use combustion process. Outside the stove there is a frame around the entire perimeter that allows you to completely surround the stove with stones. In the upper part of the heater there is a decorative lattice in the form of oak leaves, forming a basket also for filling with stones. The square hole on top is designed for easy cleaning of the stove. As a result, you get an aesthetically designed stove with a maximum stone load (100 kg). A large number of stones allows you to heat the steam room faster, promotes better convection of hot air, and also allows you to get a large amount of steam. This stove is a heater It is distinguished by reliability, durability, beautiful design and small size, high efficiency. The thickness of the firebox is 4-8 mm. It is possible to install a steam generator. The length of the combustion chamber is 40 cm, width and height - 30 cm. Overall and connecting dimensions Width 600.0 (mm) Height 620 .0 (mm) Depth 850.0 (mm) Chimney diameter 110.0 (mm) Additional characteristics of solid fuel stoves Combustion chamber volume 47.0 (l) Additional characteristics weight 90 kg height 65 mm width 60 mm length 90 mm extension through the wall 30 cm intended for indoor use 20 cubic mm power 7-15 kW